How to Whiten Yellowed Vinyl Flooring

Vinyl flooring is a great and cost-effective choice for homes, but its vibrant and shining look may fade with time. If your vinyl floor has yellowed, you can take a few steps to restore it to its former glory.

Start off by giving it a good clean – sweep away any dirt and debris and then mop using a mild detergent in warm water. When the floor is dry, you might need to use a specific cleaner to remove any persistent grime or stains. Take care to read the instructions on the cleaner thoroughly.

When it’s clean, use a whitening product to revive the vinyl back to its original color. Most whitening products are tailored for vinyl flooring so they shouldn’t damage the surface in any way. You can pick up these products at home improvement stores and apply them using a cloth or mop – follow the directions on the packaging for optimum results.

If the whitening product doesn’t work, try gently scrubbing away discolored areas with a mild abrasive such as steel wool – again, read through the instructions carefully before you start.

Before applying any product, always conduct a test in an inconspicuous area first to make sure it won’t damage your floor. Ultimately, don’t forget to put on a coat of wax or sealant after cleaning in order to safeguard your floor from further damage.

By following these simple steps, you can get your yellowed vinyl back to that beautiful, new look!

Step-by-Step Guide on How to Whiten Yellowed Vinyl Flooring

1. Get a mild detergent, warm the water, and clean the floor with a damp mop to remove dirt and debris.

2. Make a paste of baking soda and water and spread it on any yellowed areas; let it sit for 30 minutes.

3. Wipe away the paste with a clean cloth, rinse with clean water, and dry with a fresh cloth.

4. Apply some vinyl floor cleaner to the floor, buffing it in with a soft cloth.

5. Complete your cleaning by sealing the floor, which will help prevent further discoloration.

How To Protect Vinyl flooring from Turning Yellow

Vinyl flooring is one of the go-to choices for both residential and commercial areas due to its great durability; however, it can discolor over time due to UV rays, chemicals, and other environmental elements. Thankfully, there are a few things you can do to prevent your vinyl flooring from becoming yellowed.

1. Use a UV-Protective Coating: Applying a UV-protective coating to your vinyl flooring can help protect it from the sun’s rays. This type of coating will create a barrier between the sun’s rays and your vinyl flooring, reducing the risk of discoloration.

2. Clean Regularly: Regularly cleaning your vinyl flooring is important for maintaining its appearance. Use a mild detergent, warm water, and a soft-bristled brush to gently scrub away dirt and debris.

3. Avoid Harsh Chemicals: Harsh chemicals, such as bleach and ammonia, can cause your vinyl flooring to discolor. Therefore, it is important to avoid using these types of cleaners on your vinyl flooring.

4. Use Rugs and Mats: Placing rugs and mats

Leave a Comment

Your email address will not be published. Required fields are marked *